How to test for water hardness and save your skin, your dishes, and your plumbing
By clicking one of our links you're supporting our labs and our independence, as we may earn a small share of revenue. Recommendations are separate from any business incentives.
Hard water sounds like an oxymoron. Except when it’s icy, we think of water as soft and flowing, like rainwater. But the “hard” in hard water refers to the minerals dissolved in it—usually calcium and magnesium. Soft water has very little of those minerals.
Mineral-loaded hard water is common all over the United States, and it’s more of an issue where the water is sourced from the ground. Hard water is absolutely safe to drink, but if you have it piped into your home, hard water can affect your appliances, your skin, your laundry, and your plumbing fixtures.
You might encounter white deposits on your faucets or in your shower. The minerals in the water can also make it harder to get yourself clean—calcium and magnesium bond with soap molecules to create soap scum, so your soap is less effective.
Before you can do anything about hard water, you need to determine whether you have it. If your skin feels dry and covered with a residue after showering, your pipes have scale deposits, and your glasses and dishes come out of the dishwasher badly spotted, those are tattle-tale signs. If you want to know for sure whether your water is hard, it’s easy to find out.
For an informal test, you can DIY.
1. Fill a cup or a jar with 12 ounces of tap water.
2. Add 10 drops of liquid soap (not detergent).
3. Attach the lid and shake or stir vigorously for a few seconds.
4. Look for suds at the top. If you have lots of bubbles at the top and clear water underneath, you have soft water, and you can stop testing.
5. If you don’t see thick suds, and the water underneath is cloudy, repeat the process, 10 drops of soap at a time, until you see foam. If it takes 40 drops of soap or more to raise some suds, you have hard or very hard water.
Test strips can give you results in as little as 15 seconds and can give you a more accurate measurement of the level of hardness in your water.
1. Take the strip out of the bag without touching the testing area.
2. Dip the strip in your tap water for a second or two.
3. Compare the color on the strip to the chart on the package.
Your municipality may have already done water testing.
1. Call your water company or visit your town or county water department website.
2. Check the levels of hardness in your water and recommendations on what, if anything, you should do about it.
Luckily, once you know you have hard water, there’s plenty you can do. You can deal with it on an individual level or throughout the home. Here are our suggestions.
Using Rinse Aid in your dishwasher is a good starter solution for your hard water problem. It doesn’t actually soften the water, but it makes moisture sheet off the dishes, glasses, and flatware to reduce spotting.
Use vinegar to attack the scale. It’s another short term solution—with hard water, the scale will come back over time.
Some high-end European dishwasher brands offer dishwasher salt to soften the water. Don’t count on throwing in a handful of table salt, though. Miele dishwashers, among the best we've tested, have special dispensers that you fill with their salt to keep your dishes spot free.
A water softener is an appliance that works by exchanging the calcium and magnesium in hard water with the salt in sodium pellets. If you’re watching your salt intake and don’t want to consume it in your drinking water, you can filter the faucet, have your water softener bypass the kitchen sink, or purchase a softener that works with potassium instead of sodium.
Once you know that you have hard water, you can deal with it. One thing is certain: When you soften your water, your skin and hair will thank you, your plumbing and appliances will avoid scale, and your dishes and glasses will come out spot free.
Sign up for our newsletter to get real advice from real experts.