Unfortunately, we've found that this pricy product doesn't deliver in all three areas. While HP has designed a flexible, intuitive stand and given above average port options, the ZR2740w's color production is considerably worse than much cheaper monitors. For a monitor over $700, we were expecting much stronger results.
The HP ZR2740w makes use of a stand that is very similar to the stand for HP's ZR24w, except that it also allows the panel to swivel/rotate atop its pedestal.
The on-set controls for the ZR2740w are very simple. There are only four buttons; one for power and one for source. The other two--decrease and increase--are hold-overs from versions of the monitor with built-in speakers, for volume control. The HP ZR2740w has no product menu, and thus its on-set controls are really only power and input (source). Despite their simple nature, the monitor's response time to being powered on/off or changing source is impressively fast.
In the box, you'll find the panel, stand component, power cable, software CD, warranty card, and cables for DVI and DisplayPort.
The HP ZR2740w tested with the best contrast ratio out of the three products we pulled for comparison--it also has the best contrast ratio of any monitor we've yet tested. Just shy of 1000:1 is an outstanding result, as most general use monitors serve their intended use just fine with a ratio of 200:1. This is ample black and white differentiation, and a great result. More on how we test contrast.
The HP ZR2740w tested with terrific, unblemished uniformity. We test uniformity subjectively, affixing a fully black and a fully white screen on a monitor display to ensure that the screen is evenly lit. The HP ZR2740w tested with high marks, showing both screens with perfect uniformity. More on how we test uniformity.
This is a very good color temperature result. The X-axis below maps out the HP ZR2740w's color temperature across the light input spectrum. The Y-axis illustrates deviations from the initial temperature of the ZR2740w's light input (which we'll call 0° for clarity). Any deviation in light temperature that is greater than +/-200° will be visible to human beings, but none of the ZR2740w's color temperature swings extend beyond the limit of perceptibility.
In short, the lack of visible error is practically equivalent to no error whatsoever. A very good result. More on how we test color temperature.
While it tested with excellent form during our contrast and color temperature tests, the ZR2740w did not test so splendidly in the realm of color curves. These red, green, blue, and greyscale curves (below) are not terrible, but they are very bumpy. The curves represent the spectrum of hues/shades across the 256-step scale for RGB and greyscale, and their bumpiness illustrates a choppy transition between neighboring steps. This is going to result in banding between many colors and shades. More on how we test color curves.
The HP ZR2740w tested with a decent, but ultimately flawed, color gamut. The chart below illustrates how the ZR2740w's gamut (the white triangle) against the standard, ideal gamut for RGB display devices (the black triangle). Comparably, the HP's green, red, and white points are all but perfect. Its blue point is considerably undersaturated--meaning it is not full of enough "blue" to encompass the full spectrum of blue hues that it should. More on how we test color gamut.
The table below contains all the numeric details of the 's color gamut performance, compared to the sRGB standard.
When looking head-on (0°) at the HP ZR2740w, it has a massive contrast ratio resulting from deep blacks and very bright whites. That contrast ratio makes obtuse-angle viewing much easier, and at 45° the ZR2740w still sports a contrast ratio of 324:1, which is higher than the head-on contrast ratio of some budget monitors.
This widescreen HP offers plenty of leeway for group viewing.
The HP ZR2740w has two connectivity areas: along its left side, where there are two USB inputs, and on the lower back of the monitor, tucked into a recessed area that's somewhat hidden.
The easiest way to plug into this obscured back area is to raise the panel to full height, and then rotate it to portrait orientation.
In this area, you'll find inputs for DisplayPort and DVI, as well as USB standard B and two USB standard A ports.
While this isn't a staggering amount of connectivity options, it's a great deal more than you'd find on a low-end, budget monitor.
With an MSRP of $729, we were expecting physical and technological excellence from the HP ZR2740w. While it delivers on the physical side--its stand is a sturdy, flexible addition to the panel that gives it the versatility of a professional artist's monitor--the color accuracy of this HP left us feeling down and out. We think it would be a much more valuable product were it less expensive, but that price demands a perfect display, and the ZR2740w doesn't deliver.
Meet the tester
Lee has been Reviewed's point person for most television and home theater products since 2012. Lee received Level II certification in TV calibration from the Imaging Science Foundation in 2013. As Editor of the Home Theater vertical, Lee oversees reviews of TVs, monitors, soundbars, and Bluetooth speakers. He also reviews headphones, and has a background in music performance.See all of Lee Neikirk's reviews
Checking our work.
We use standardized and scientific testing methods to scrutinize every product and provide you with objectively accurate results. If you’ve found different results in your own research, email us and we’ll compare notes. If it looks substantial, we’ll gladly re-test a product to try and reproduce these results. After all, peer reviews are a critical part of any scientific process.Shoot us an email