Skip to main content

Firmware Update 2.01 for Nikon D3

Firmware update 2.01 is also now available for the Nikon D3 DSLR.

Recommendations are independently chosen by Reviewed’s editors. Purchases you make through our links may earn us a commission.

Firmware update 2.01 is also now available for the Nikon D3 DSLR. The upgrade makes it possible to view the Geodetic information in ViewNX Ver and also improves the continuous-servo AF performance.

Other improvements include:

  • When the AF-ON button is pressed, the monitor turns off and a focus point can now be selected using the multi selector.

  • Photo information displayed in full-frame playback has been modified as follows:

HI-, LO- has been changed to Hi, Lo

WARM TONE has been changed to WARM FILTER

COLOR CUSTOM has been changed to COLOR BALANCE

  • Manamah, displayed in the Time zone options for the World time item in the setup menu, has been changed to Manama.

  • An issue that, in extremely rare cases, resulted in noticeable black dots in images captured with Long exp. NR in the shooting menu set to On has been resolved.

  • When the Speedlight SB-800 was mounted on the camera with flash mode set to Distance-priority manual (GN) mode, and then the exposure meters were reactivated or the camera was turned on, the distance information displayed on the SB-800 changed.  This issue has been resolved.

  • An issue that, in some rare cases, caused images captured with the following lenses to be under-exposed, has been resolved.

AF-S VR Micro-Nikkor 105mm f/2.8G IF-ED

AF VR Zoom-Nikkor 80-400mm f/4.5-5.6D ED (5.0x)

Windows Download

Mac Download

Up next